The WCT-X10 is a standalone turbocharger actuator tester and combined advanced programming tool for service personnel and turbocharger repairers.
Compact design
It is very easy to use with its 7.0 inch full touch screen
Simple interface
It shows and adjusts the current voltage and position values of the turbo VGT Turbochargers
The WCT-X10 can be used with Siemens VDO® type actuators to reset the end stop positions after either a new actuator is fitted or the turbocharger has been refurbished.
İntegrated in to the tool is an advanced reprogramming system for the Garrett® Hella REA® actuators
Portable Wastegate Controller Test Unit
SMARTER THAN OTHERS
Automative communication protocols which can be used to do the following:
Supports PWM
FDCan
Can 2.0
inbust
j1939
Automatic cable type selection
Reset the end stop positions.
Set the minimum flow position.
Copy the actuator settings from one actuator to another.
You can control vacuum test
Check the voltage output of position sensors fitted to vacuum actuators.
Hard carry case with moulded foam inserts
Electric transmission is impeded through silicone design
7 inches Wastegate Controller Test Unit (WCT-X10)
Main Connection Cable
14 pieces 12 Volt R.E.A MBS-FX Cable Series in hardcase
4 pieces 24 Volt MBS-FX Cables Series (Optional)
Power Adapter
Car Lighter Adapter
What’s in the Box
MBS Balance System GmbH
Stettiner Str. 4 / 45770
Marl / DEUTSCHLAND
Copyright © 2024 MBS Balance. All rights reserved.
FlowBench Machine
